Production of the  OOO "ZOOM" takes the orders for applying the adhesive composition on the film (PP, BOPP, PE, etc.), supplied by the client. For making the self-adhesive film, the base film must meet the following requirements:

- features of the film - not heat shrinkable, without  anti-block additives, sliding additives, chalk additives;

- thickness tolerance +-5% (thickness variation should be evenly distributed over the entire width of the web), under tension sag of the film is not allowed;

- not allowed: gels, foreign inclusions, through holes, pressed folds, corrugations, litter;

- winding should be tight, edge of the roll should be smooth, color should be even, without joints;

-  activation on the inner side of the film winding in the roll should be 38-44 dine / cm, gaps on the inner side, and the activation breakdown on the outer side are not allowed.

Also, experts can process the application of water-based glue supplied by the customer. For production of self-adhesive film, the adhesive dispersion must meet the following requirements:

- not to foam under the  mechanical action  of the anilox;

- the number of hydrogen ions should be within the PH=6,5 - 8 u;

- the solution should be free of coagulants and sediment;

- one or two-component system;

- assumed viscosity 15 - 25 sec.