self-adhesive protective film ZOOM- 3.2 for glass and ceramics
|Protective film grade||ZOOM - 3.2|
|Serial color of protective film||
|Serial thickness of the adhesive film, µm||35; 50; 60|
|Serial width of the adhesive film, µm||100÷1500|
|Serial winding length in roll, MP||100|
|Operating temperature of the protective film, C||-40÷+80|
|Stable adhesion, g/25 mm||700÷1000|
Here you can buy a protective film for the mirror ZOOM-3.2 and its modifications. This model of film is designated to protect from fragments of the mirror, which are formed when it is broken. The film is glued to the back side of the mirror and does not allow the fragments to scatter when it is broken.
One side of the film is already covered with special adhesive, so the process of gluing of the film is very simple and fast, and does not require special skills. Moreover, you don't even need to use additional tools.
What surfaces is the film suitable for?
The main purpose of film is the protection of the mirrors, however, it can also be used to protect the glass, finishings, tiles, siding, etc. Film securely adheres to almost any surface and it protects not only from minor mechanical damage and also from moisture attacks.
Why you should choose ZOOM-3.2 film?
In relation to numerous competitors, given film model has a large number of advantages:
- High level of adhesion
- High tensile strength
- Easy to apply on the surface
- Easy to remove from surface
- Moderate market price
- Ecological compatibility
What is the shelf life of the film?
A key feature of this type of film is that its shelf life is practically unlimited. Properly glued film can last for decades without the need for replacement.
Having pasted a protective film only once, you will provide safety from mirror chips to yourself and your children for a long time.
What is the film ZOOM-3.2 made of?
Self-adhesive protective film is made of polypropylene, it is pressed under high pressure with the use of special technologies and chemical additives, thanks to which the film is transparent or with a certain color, and has high strength.
How to buy self-adhesive protective film ZOOM-3.2?
You can place an order to purchase a film calling +7 (831) 413-66-37. Also you can order a call-back, leaving your phone number using special form on the website or you can send a letter with a request to the mail firstname.lastname@example.org or email@example.com.
Are used to protect:
- Splinter proof permanent protective film for the back side of the mirror
INSTRUCTION for intermediate and ultimate users on operation of the self-adhesive splinterproof protective film for the backside of mirrors of ZOOM-3.2 brand (further «protective film for mirrors»)
1.1. The protective film for mirrors is used to protect a person from mirror fragments (fragments remain glued to the film if the mirror is broken) and to protect the amalgam of the mirror from mechanical damage during storage, transportation, installation, operation. Protective film for mirrors is a non-removable film. Protective film for mirrors belongs to safety class A1.
1.2 The protective film for mirrors is manufactured in the following colours: black, white, grey and transparent. Roll length is 100 MP, width is up to 1500 mm, thickness is 90 microns. Base material: high-pressure polyethylene or biaxially oriented polypropylene. Adhesive is environmentally friendly water-based acrylic dispersion with peeling strength from 600 to 800 g / inch. The diameter of the cardboard spool of the film’s roll is 76 mm, the thickness of the spool wall is 5 mm.
2.1. Transportation of rolls of protective film for mirrors is conducted on pallets in horizontal or upright position, with the obligatory interlining made of corrugated cardboard between the rolls, in the enclosed transport protected from atmospheric condensation.
2.2. Each packed pallet must have a packing sheet. 2.3. Transportation, loading works should be carried out with extreme care to prevent damage to the rolls of protective film for mirrors.
3.1. Protective film for mirrors should be stored in rolls in a dry, ventilated area, without direct sunlight, dust and water at a temperature of + 5 to +35 ° C, at a distance of 1 m from the heating devices, without the aggressive vapors, inflammable liquid, refined products and combustion products in the environment.
3.2. The shelf life of the protective film for mirrors in the original packaging is 3 (three) months from the date of manufacture while observing storage conditions by the Customer.
4. COATING CONDITIONS.
4.1.Amalgam of the mirror should be dust-free, dry and clean, have no traces of oil, chemicals and other foreign elements. In the case of a partial detachment of the protective film for mirrors from the surface of the amalgam the pressure should be increased and/or equalized over the surface, because the glue of permanent adhesiveness is a contact adhesive, the size of its adhesion to the surface is directly proportional to the pressure of the tool, pressing the film. Maximum adhesion occurs 24 hours after application of the film to the surface of the amalgam of the mirror at a storage temperature of the product with a film of not less than 150C
4.2. During the application a protective film for mirrors on the surface of the mirror’s amalgam, it is recommended to provide the surface temperature within + 150C ÷ + 350C.
4.3. Upon exposure to a protective film for mirrors of negative temperatures, it must be kept in a warm room for 24 hours to a temperature of at least +150C, throughout the volume of the roll before use.
4.4. Application of a protective film for mirrors is made by help of a laminating machine, roller or squeegee blade. Manual application of the protective films for mirrors is recommended to do with the help of 2 people. Application of protective films for mirrors must be done without pressed creases, air pockets.
5. MANUAL APPLICATION.
5.1. Clean the surface of amalgam of the mirror.
5.2. Take a roll of protective film for mirrors of a suitable width to the width of the product.
5.3. Unwind the roll of protective film for mirrors along the length of the product with the adhesive layer down and pull the film.
5.4. The protective film for mirrors in the tense state glue to the short edge of the product with a free edge.
5.5. Then gradually lower the protective film for mirrors to the surface along the length of the product and glue, smoothing the unevenness with a squeegee blade or roller.
5.6. Finish the application by cutting the web of the product along the perimeter, getting beyond the protective film for mirrors.
6.1. The integrity of the protective film on the surface of the product retains its adhesive properties.
6.2. The properties of the protective film can be lost in case of violation of storage and operation conditions.
6.3. It is strongly recommended to apply a protective film on the surface, tested or recommended by the laboratory of OOO "ZOOM".
6.4. In case of violation of the operation requirements of the protective film, the manufacturer reserves the right not to accept claims relating to quality.